Use this mode to shoot landscapes.

  1. Rotate the mode dial to
  2. button
  3. Landscape
  4. button
Noise reduction burstThis enables you to shoot a sharp landscape with a minimum of noise.
Single shot
(default setting)
Saves images with emphasized outlines and contrast.
  1. Select [Noise reduction burst] or [Single shot].
  2. Frame the subject and take a picture.
    • The camera focuses on the area in the center of the frame. The position of the area cannot be moved.
    • The camera focuses at infinity.
    • For [Noise reduction burst]:
      • While the icon on the shooting screen is displayed in green, press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.
      • Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the screen switches to the shooting screen.
    • For [Single shot]:
      • One image is captured when the shutter-release button is pressed all the way.

Notes about [Noise reduction burst]

  • The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen on the shooting screen.
  • Continuous shooting may not be possible in certain shooting conditions.