Vibration reduction

Select the vibration reduction setting used when shooting.
Select [Off] when using a tripod to stabilize the camera during shooting.

Option	Description
Normal (default setting)	Suited to capturing images of subjects that are not moving.
Active	Suited to capturing images if a relatively large camera shake is likely to occur, such as when shooting from a car or under poor foothold conditions.
Normal (framing first)	Compared to the [Normal] setting, you can reduce the amount of difference between your intended composition and the captured image.
Active (framing first)	Compared to the [Active] setting, you can reduce the amount of difference between your intended composition and the captured image.
Off	Compensation is not performed.

After turning on the camera or after switching from playback mode to shooting mode, wait until the shooting screen is ready before taking pictures.
[Normal] or [Active] is recommended if you are not concerned about the slight variations in image composition that may occur. The amount of camera shake compensation is higher than that of [Normal (framing first)] or [Active (framing first)].
[Normal (framing first)] is recommended when you intend to significantly change the direction of the camera while shooting, such as when panning. The camera automatically detects the panning direction and only compensates for vibration caused by camera shake.
Images on the screen may be displayed blurry immediately after shooting.
Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.