Charging the battery

  1. Use the USB cable (included) to connect the Charging AC Adapter to the camera with the battery inserted.
  2. Insert the plug of the Charging AC Adapter into an electrical outlet.
    • A plug adapter is attached depending on the country or region of purchase. The shape of the plug adapter varies with the country or region of purchase.
    • When charging starts, the charge lamp flashes slowly. The charging time for a fully exhausted battery is about 1 hour and 40 minutes.
    • When charging is complete, the charge lamp turns off.
    • The battery cannot be charged when the charge lamp quickly flashes, possibly due to one of the reasons described below.
      • The ambient temperature is not suited to charging.
      • The USB cable or Charging AC Adapter is not properly connected.
      • The battery is damaged.
  3. When charging is complete, unplug the Charging AC Adapter from the electrical outlet, and disconnect the USB cable.

Notes about the USB cable

  • Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21 could result in overheating, fire or electric shock.
  • Check the shape and direction of the plugs and do not insert or remove the plugs at an angle.

Notes about charging the battery

  • Do not, under any circumstances, use another make or model of AC adapter other than the EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially available USB-AC adapter or a battery charger for a mobile phone. Failure to observe this precaution could result in overheating or in damage to the camera.
  • You can use the camera while it is charging, but the charging time will take longer. However, if the battery level is extremely low, you may not be able to use the camera while the battery is charging.