Wireless Remote (WR) Options
G button U B setup menu
Adjust status LED and link mode settings for optional WR‑R11a and WR‑R10 wireless remote controllers. You can also choose a link mode for connection to optional radio-controlled flash units that support Advanced Wireless Lighting.
- A WR‑A10 adapter is required when using the WR‑R10.
- Be sure the firmware for the WR‑R10 has been updated to the latest version (version 3.0 or later). For information on firmware updates, see the Nikon website for your area.
Enable or disable the status LEDs on the WR‑R11a or WR‑R10 wireless remote controller mounted on the camera. For more information, see the documentation supplied with the wireless remote controller.
Choose a link mode for WR‑R11a or WR‑R10 wireless remote controllers mounted on other cameras or radio-controlled flash units that support Advanced Wireless Lighting. Be sure that the same mode is selected for the other devices.
The camera connects only to devices with which it has previously been paired. Press the pairing button on the wireless remote controller connected to the camera to pair it with other devices.
Communication is shared among all devices with the same four-digit PIN. Enter a four-digit PIN of your choosing. Press 4 or 2 to highlight digits and press 1 or 3 to change. Press J to enter and display the selected PIN.
- Regardless of the option selected for [Link mode], signals from paired wireless remote controllers will always be received by the WR‑R11a or WR‑R10. Users of the WR‑1 wireless remote controller will need to select pairing as the WR‑1 link mode.