Readying the MC-N10

Inserting Batteries in the MC-N10

Insert two third-party AA batteries.

• Use batteries of the same make and model.

1. Keeping the battery chamber cover latch release pressed (q), slide and open the battery chamber cover as shown (w).

   

2. Insert the batteries in the orientations shown (e) and close the battery chamber cover.

   • Slide the cover closed while pressing firmly on t.

     

Connecting the MC-N10 to the Camera

Turn the camera off before connecting the MC-N10 via USB.

Be sure always to use the latest version of the camera firmware. The latest version of the camera firmware can be downloaded from the Nikon Download Center.

1. Mount the camera on a piece of third-party camera equipment to which an ARRI-compatible rosette adapter has been attached.

   • You will need to attach a third-party rosette adapter before using equipment not provided with an adapter of its own.
   • For more information, see the documentation provided with the equipment in question.

2. Attach the MC-N10 to the rosette adapter.

   • Align the MC-N10’s rosette adapter attachment screw with the threaded socket on the equipment’s rosette adapter (q) and rotate the rosette adapter attachment wheel in the direction shown to fix the MC-N10 in place (w).

     

   • Do not attempt to insert the MC-N10’s rosette adapter attachment screw into the tripod socket on the camera body. Attempting to force the screw into the tripod socket could damage the camera or MC-N10.

3. Connect the MC-N10 to the camera using the MC-N10’s supplied USB cable.

   • If your camera is equipped with both USB data and USB Power Delivery connectors, connect the cable to the USB data connector.