Mark for upload
- Playback mode
button- Mark for upload
button
Select still images separately on the camera’s playback screen, and then upload them to a smart device with the SnapBridge app installed.
Use this function when the network menu 
[Send while shooting] [Still images] is set to [No], or when uploading images that are not selected using [Upload (photos)].
To send images, enable the auto download function of the SnapBridge app. For use of the SnapBridge app, see the online help of the SnapBridge app (https://nikonimglib.com/snbr/onlinehelp/en/index.html).
- Use the multi selector
or rotate it to select the image you want to upload to a smart device.
- Move the zoom control toward
(
) to switch to full-frame playback, or 
(
) to switch to thumbnail playback.
- Move the zoom control toward
- Use
to select ON or OFF.
- When ON is selected,
is displayed under the selected image. Repeat steps 1 and 2 to select additional images.
- When ON is selected,
- Press the button to apply the image selection.
- The selected still images are uploaded to the smart device.
Notes about [Mark for upload]
- Still images are uploaded at an image size of up to 2 megapixels.
- RAW images and movies cannot be selected for upload.
- Note that when you select the setup menu [Reset all] or the network menu [Restore default settings], the Mark for upload settings that you made are canceled and the camera settings are also reset to default.
- To cancel the Mark for upload settings, go to step 2 and hide .
[Send while shooting]
When you use the network menu [Send while shooting] (Send while shooting), still images can be sent automatically to a smart device every time they are captured with the camera.