f4: Touch Fn

G button UA Custom Settings menu

Use monitor touch controls to adjust settings while framing pictures in the viewfinder.

Touch Fn is available only when the monitor is in storage position with the screen facing outward.

Enable/disable touch Fn

Select [ON] to enable touch Fn.

Assign touch Fn

The roles that can be assigned to touch Fn are listed below.

Role	Description
[Move focus point]	When sliding a finger over the touch Fn area, the focus point will reposition in the direction of the slide. Highlight [Move focus point] and press 2 on the multi selector to choose the operation performed when double-tapping the touch Fn area in the monitor. [Select center focus point]: The focus point is positioned to the center of the viewfinder. [Set absolute focus position]: The touch Fn area represents the entire viewfinder, and the focus point is repositioned to the corresponding position in the viewfinder by double-tapping the desired location.
[Switch eyes]	When the camera detects the eyes of a human or animal portrait subject, you can choose the eye used for focus by tapping the touch Fn area in the monitor.
[Framing grid]	Tapping the touch Fn area in the monitor displays a framing grid in the viewfinder. Tap again to hide the grid. The grid type can be selected using Custom Setting d16 or g14 [Grid type].
[Zoom on/off]	Tap the touch Fn area in the monitor to zoom the display in the viewfinder in on the area around the current focus point. Tap again to cancel zoom. To choose the zoom ratio, highlight [Zoom on/off] and press 2.
[Virtual horizon]	Tap the touch Fn area in the monitor to enable the virtual horizon display in the viewfinder. Tap again to hide the display. The display type can be selected using Custom Setting d17 [Virtual horizon type].

Touch Fn area

Choose the area of the monitor used for touch Fn. The areas for use when the camera is rotated to take pictures in “tall” and “wide” orientations can be selected separately.