Camera setup

Turn the camera on, choose a language, and set the clock. Before using the camera for the first time, follow the steps below to choose a language and time zone and set the clock so that the correct time and date will be recorded with any pictures you take.

1. Press and hold the power switch to turn on the camera.
   
   • To turn the camera on, firmly press the power switch.
   • When the camera turns on, the power-on lamp turns on for about 5 seconds.
2. Press and hold the A button, and in the setup menu highlight [Language] and press the multi selector right.
   
   For information on using the menus, see “Using the menus” (Using the menus).
3. Select a language.
   Press the multi selector up or down to highlight the desired language and press the center of the multi selector (the languages available vary with the country or region in which the camera was originally purchased).
4. Highlight [Time zone and date] and press the multi selector right.
   
5. Choose a time zone.
   
   • Select [Time zone] in the [Time zone and date] display.
   • The display lists selected cities in the chosen zone and the difference between the time in the chosen zone and UTC.
   • Highlight a time zone in the [Time zone] display and press the center of the multi selector.
6. Turn daylight saving time on or off.
   
   • Select [Daylight saving time] in the [Time zone and date] display.
   • Select [ON] (daylight saving time on) or [OFF] (daylight saving time off).
   • Selecting [ON] advances the clock one hour; to undo the effect, select [OFF].
7. Set the clock.
   
   • Select [Date and time] in the [Time zone and date] display.
   • Press the center of the multi selector after using the multi selector to set the clock to the date and time in the selected time zone in the [Date and time] display (note that the camera uses a 24-hour clock).
8. Choose a date format.
   
   • Select [Date format] in the [Time zone and date] display.
   • Highlight the desired date (year, month, and day) display order and press the center of the multi selector.
9. Exit the menus.
   
   Lightly press the shutter-release/REC button halfway to exit to shooting mode.