Connect to PC

Wi-Fi Connection

Select [Enable] to connect using the settings currently selected for [Network settings].

If more than one profile already exists, you can press J to select a profile from a list.
To edit an existing profile, highlight it and press 2.

Option	Description
[General]	[Profile name]: Rename the profile. The default profile name is the same as the network SSID. [Password protection]: Select [On] to require that a password be entered before the profile can be changed. To change the password, highlight [On] and press 2.
[Wireless]	Infrastructure mode: Adjust settings for connection to a network via a router. [SSID]: Enter the network SSID. [Channel]: Selected automatically. [Authentication/encryption]: Choose [OPEN] or [WPA2-PSK-AES]. [Password]: Enter the network password. Access-point mode: Adjust settings for direct wireless connection to the camera. [SSID]: Choose the camera SSID. [Channel]: Choose [Auto] or [Manual]. [Authentication/encryption]: Choose [OPEN] or [WPA2-PSK-AES]. [Password]: If [WPA2-PSK-AES] is selected for [Authentication/encryption], you can choose the camera password.
[TCP/IP]	Adjust TCP/IP settings for infrastructure connections. An IP address is required. If [Enable] is selected for [Obtain automatically], the IP address and sub-net mask for infrastructure mode connections will be acquired via a DHCP server or automatic IP addressing. Select [Disable] to enter the IP address ([Address]) and sub-net mask ([Mask]) manually.

Option

Description

[General]

[Profile name]: Rename the profile. The default profile name is the same as the network SSID.
[Password protection]: Select [On] to require that a password be entered before the profile can be changed. To change the password, highlight [On] and press 2.

[Wireless]

Infrastructure mode: Adjust settings for connection to a network via a router.
- [SSID]: Enter the network SSID.
- [Channel]: Selected automatically.
- [Authentication/encryption]: Choose [OPEN] or [WPA2-PSK-AES].
- [Password]: Enter the network password.
Access-point mode: Adjust settings for direct wireless connection to the camera.
- [SSID]: Choose the camera SSID.
- [Channel]: Choose [Auto] or [Manual].
- [Authentication/encryption]: Choose [OPEN] or [WPA2-PSK-AES].
- [Password]: If [WPA2-PSK-AES] is selected for [Authentication/encryption], you can choose the camera password.

[TCP/IP]

Adjust TCP/IP settings for infrastructure connections. An IP address is required.

If [Enable] is selected for [Obtain automatically], the IP address and sub-net mask for infrastructure mode connections will be acquired via a DHCP server or automatic IP addressing.
Select [Disable] to enter the IP address ([Address]) and sub-net mask ([Mask]) manually.

Adjust upload settings.

Select [On] to upload new photos as they are taken.

Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera.
Movies and photos taken during movie mode are not uploaded automatically when recording is complete. They must instead be uploaded from the playback display (Uploading Pictures).

Select [Yes] to delete photographs from the camera memory card automatically once upload is complete.

When uploading NEF + JPEG images, choose whether to upload both the NEF (RAW) and JPEG files or only the JPEG copy.

When [RAW primary - JPEG secondary] is selected for [Secondary slot function] in the photo shooting menu, the option chosen for [Send file as] applies only to photos uploaded automatically by selecting [On] for [Auto send].

Select [Yes] to remove transfer marking from all images. Upload of images with a “sending” icon will immediately be terminated.

View the MAC address.