Save current camera menu settings to a memory card. You can also load saved settings, allowing menu settings to be shared among cameras of the same model.

  • If two memory cards are inserted, the settings will be saved to the card in the slot selected using [Primary slot selection] in the photo shooting menu.

  • The following settings are saved:

Settings that can be saved and loaded

PLAYBACK MENU

[Playback display options]

[Dual-format recording PB slot]

[Image review]

[After delete]

[After burst, show]

[Rotate tall]

PHOTO SHOOTING MENU

[File naming]

[Primary slot selection]

[Secondary slot function]

[Choose image area]

[Image quality]

[Image size]

[NEF (RAW) recording]

[ISO sensitivity settings]

[White balance]

[Set Picture Control] (Custom Picture Controls are saved as [Auto])

[Color space]

[Active D-Lighting]

[Long exposure NR]

[High ISO NR]

[Vignette control]

[Diffraction compensation]

[Auto distortion control]

[Flicker reduction shooting]

[Metering]

[Flash control]

[Flash mode]

[Flash compensation]

[Focus mode]

[AF-area mode]

[Vibration reduction] (the options available vary with the lens)

[Auto bracketing]

MOVIE SHOOTING MENU

[File naming]

[Destination]

[Choose image area]

[Frame size/frame rate]

[Movie quality]

[Movie file type]

[ISO sensitivity settings]

[White balance]

[Set Picture Control] (Custom Picture Controls are saved as [Auto])

[Active D-Lighting]

[High ISO NR]

[Vignette control]

[Diffraction compensation]

[Auto distortion control]

[Flicker reduction]

[Metering]

[Focus mode]

[AF-area mode]

[Vibration reduction] (the options available vary with the lens)

[Electronic VR]

[Microphone sensitivity]

[Attenuator]

[Frequency response]

[Wind noise reduction]

[Headphone volume]

[Timecode] (excepting [Timecode origin])

CUSTOM SETTING MENU

All items

SETUP MENU

[Language]

[Time zone and date] (excepting [Date and time])

[Limit monitor mode selection]

[Information display]

[Non-CPU lens data]

[Clean image sensor]

[Image comment]

[Copyright information]

[Beep options]

[Touch controls]

[HDMI]

[Location data] (excepting [Position])

[Wireless remote (WR) options]

[Assign remote (WR) Fn button]

[USB power delivery]

[Energy saving (photo mode)]

[Slot empty release lock]

Save Menu Settings

Save settings to a memory card. If the card is full, an error will be displayed and settings will not be saved. Saved settings can only be used with other cameras of the same model.

Load Menu Settings

Load saved settings from a memory card. Note that [Load menu settings] is available only when a memory card containing saved settings is inserted.

Saved Settings

Settings are saved to files named “NCSET***”. “***” is an identifier that varies from camera to camera. The camera will not be able to load settings if the file name is changed.