To choose the functions assigned to the following controls in movie mode, whether used individually or in combination with the command dials, highlight the desired option and press J.

w Fn1 button
y Fn2 button
V AF-ON button
8 Center of sub-selector
G Shutter-release button
l Lens control ring

The roles that can be assigned to these controls are as follows:

Option w y V 8 G l
t Power aperture (open)
q Power aperture (close)
i Exposure compensation +
h Exposure compensation –
n Subject tracking
b Framing grid display
g Protect
K Select center focus point
A AF-ON
F AF lock only
E AE lock (Hold)
C AE lock only
B AE/AF lock
p Zoom on/off
C Take photos
1 Record movies
J Choose image area
m White balance
h Set Picture Control
y Active D-Lighting
w Metering
z Focus mode/AF-area mode
H Microphone sensitivity
W Peaking highlights
c Rating
X Focus (M/A) 1, 2
q Power aperture 2
E Exposure compensation 2
9 ISO sensitivity 2
  None 2

Available only with compatible lenses.

Regardless of the option selected, in manual focus mode the control ring can only be used to adjust focus.

The following options are available:

Option Description
t Power aperture (open) Aperture widens while the control is pressed. Use in combination with Custom Setting g2 (Custom control assignment) > Fn2 button > Power aperture (close) for button-controlled aperture adjustment.
q Power aperture (close) Aperture narrows while the control is pressed. Use in combination with Custom Setting g2 (Custom control assignment) > Fn1 button > Power aperture (open) for button-controlled aperture adjustment.
i Exposure compensation + Exposure compensation increases while the control is pressed. Use in combination with Custom Setting g2 (Custom control assignment) > Fn2 button > Exposure compensation − for button-controlled exposure compensation.
h Exposure compensation – Exposure compensation decreases while the control is pressed. Use in combination with Custom Setting g2 (Custom control assignment) > Fn1 button > Exposure compensation + for button-controlled exposure compensation.
n Subject tracking Pressing the control during auto-area AF enables subject tracking; the focus point will change to a targeting reticle and the monitor to a subject-tracking display. To end subject-tracking AF, press the control again or press the W (Q) button.
b Framing grid display Press the control to turn the framing grid display on or off.
g Protect Press the control during playback to protect the current picture.
K Select center focus point Pressing the control selects the center focus point.
A AF-ON Pressing the control initiates autofocus.
F AF lock only Focus locks while the control is pressed.
E AE lock (Hold) Exposure locks when the control is pressed, and remains locked until the control is pressed a second time or the standby timer expires.
C AE lock only Exposure locks while the control is pressed.
B AE/AF lock Focus and exposure lock while the control is pressed.
p Zoom on/off Press the control to zoom the display in on the area around the current focus point. Press the control again to zoom out.
C Take photos Press the shutter-release button all the way down to take a photograph with an aspect ratio of 16 : 9.
1 Record movies Press the shutter-release button halfway to focus (autofocus mode only) and press it all the way down to start or end movie recording. The shutter-release button cannot be used for other purposes in movie mode. The shutter-release button on an optional wireless remote controller or remote cord functions in the same way as the camera shutter-release button.
J Choose image area Press the control and rotate a command dial to choose the image area. Note that the image area cannot be changed while recording is in progress.
m White balance Press the control and rotate the main command dial to choose a white balance option (in some cases, a sub-option can be selected using the sub-command dial).
h Set Picture Control Press the control and rotate a command dial to choose a Picture Control.
y Active D-Lighting Press the control and rotate a command dial to adjust Active D-Lighting.
w Metering Press the control and rotate a command dial to choose a metering option.
z Focus mode/AF-area mode Press the control and rotate the main and sub-command dials to choose the focus and AF-area modes.
H Microphone sensitivity Press the control and rotate a command dial to adjust microphone sensitivity.
W Peaking highlights Press the control and rotate the main command dial to choose a peaking level and the sub-command dial to select the peaking color.
c Rating Press the control and rotate the main command dial to rate the current picture during playback.
X Focus (M/A) Use the control to focus manually, independent of the option selected for focus mode. Press the shutter-release button halfway or press the AF-ON button to refocus using autofocus.
q Power aperture Use the control to adjust aperture.
E Exposure compensation Use the control to adjust exposure compensation.
9 ISO sensitivity Use the control to adjust ISO sensitivity.
  None The control has no effect.

Power Aperture

Power aperture is available only in modes A and M (a 6 icon indicates that power aperture cannot be used). The display may flicker while aperture is adjusted.

A Custom Settings: Fine-Tuning Camera Settings

a: Autofocus

b: Metering/exposure

c: Timers/AE lock

d: Shooting/display

e: Bracketing/flash

f: Controls

g: Movie