Nikon

عربي

Български

Čeština

Dansk

Deutsch

Ελληνικά

English

Español

Eesti

Suomi

Français

हिन्दी

Magyar

Indonesia

Italiano

日本語

Қазақ

한글

Lietuvių

Latviski

Nederlands

Norsk

Polski

Português

Română

Русский

Slovenčina

Slovenščina

Српски

Svenska

ภาษาไทย

Türkçe

Українська

简体中文

繁體中文

Select language

Inserting Memory Cards

The camera is equipped with two memory card slots: a slot that takes one CFexpress or XQD memory card (q) and another that takes one SD memory card (w), for a total of two cards, one of each type.

  • Turn the camera off before inserting or removing memory cards.
  • Holding the memory card in the orientation shown, slide it straight into the slot until it clicks into place.

    • CFexpress and XQD memory cards:

    • SD memory cards:

  • If this is the first time the card will be used in the camera, format it using [Format memory card] in the setup menu.

Number of Exposures Remaining

  • The shooting display and control panel show the number of photographs that can be taken at current settings.
  • Values over 1000 are rounded down to the nearest hundred. For example, values between 8000 and 8099 are shown as 8.0 k.

  • If no memory cards are inserted, an [–E–] indicator will be displayed.
  • If two memory cards are inserted, the camera displays only the number of exposures remaining on one card. The display of exposures remaining on either memory card depends on the camera settings below.

    • When [Overflow] is selected for [Secondary slot function] in the photo shooting menu, the number of exposures remaining on the card on which the image is recorded is displayed (0 Secondary Slot Function).
    • When an option other than [Overflow] is selected for [Secondary slot function] in the photo shooting menu, the number of exposures remaining on the card with the least amount of space available is displayed (0 Secondary Slot Function).

The Write Protect Switch

  • SD memory cards are equipped with a write-protect switch. Sliding the switch to the “lock” position write-protects the card, protecting the data it contains.

  • A “– – –” indicator and a [Card] warning appear in the shooting display when a write-protected card is inserted.
  • If you attempt to release the shutter while a write-protected card is inserted, a warning will be displayed and no picture will be recorded. Unlock the memory card before attempting to take or delete pictures.

Slot Icons

The location of the current picture is shown by an icon at the bottom left corner of the playback display.

Removing Memory Cards

After confirming that the memory card access lamp is off, turn the camera off, open the memory card slot cover, and press the card in to eject it (q). The card can then be removed by hand (w).

High-Temperature Warnings

If the camera becomes hot, a high-temperature warning (K) may appear in the shooting display.

  • Note that the camera body, battery, and memory card may be hot while the high-temperature warning (K) is displayed.
  • Wait for the warning to clear from the display before removing memory cards from the camera. Attempting to remove the memory cards immediately may cause burns or cause the cards to be dropped and damaged.