Location Data

Adjust location data settings for use when the camera is connected to a GPS or smart device.

Download from smart device

Select Yes to download location data from the smart device and embed them in pictures taken over the next two hours (note that the location data feature must be enabled in the SnapBridge app). If the camera is connected to both a smart device and a GPS unit, location data will be downloaded from the GPS unit. Location data cannot be acquired if the camera is off or the standby timer has expired.

Position

View the location data supplied by the GPS or smart device (the items displayed vary with the device).

External GPS device options

Adjust settings for connection to optional GPS devices.

Standby timer: Choose whether the standby timer remains active while a GPS device is connected. If Enable is selected, the exposure meters will turn off automatically if no operations are performed for the period specified in Custom Setting c2 (Standby timer, 0 c2: Standby Timer), reducing the drain on the battery. If a GP-1 or GP-1A unit is connected, the unit will remain active for a set period after the timer expires; to allow the camera time to acquire location data, the delay is extended by up to one minute after exposure meters are activated or the camera is turned on. Select Disable to disable the standby timer when a GPS device is connected.
Set clock from satellite: Select Yes to synchronize the camera clock with the time reported by the GPS device.