Nikon

عربي

Български

Čeština

Dansk

Deutsch

Ελληνικά

English

Español

Eesti

Suomi

Français

हिन्दी

Magyar

Indonesia

Italiano

日本語

Қазақ

한글

Lietuvių

Latviski

Nederlands

Norsk

Polski

Português

Română

Русский

Slovenčina

Slovenščina

Српски

Svenska

ภาษาไทย

Türkçe

Українська

简体中文

繁體中文

Select language

Inserting the Battery

Turn the camera off before inserting or removing the battery.

  1. Remove the BL-7 battery chamber cover.

    Lift the battery chamber cover latch, turn it to the open (A) position (q) and remove the battery chamber cover (w).

  2. Attach the cover to the battery.

    • If the battery release is positioned so that the arrow (H) is visible, slide the battery release to cover the arrow (H).

    • Insert the two projections on the battery into the matching slots in the cover as shown. The battery release will slide aside to completely reveal the arrow (H).

  3. Insert the battery.

    Insert the battery fully and securely as shown.

  4. Latch the cover.

    • Rotate the battery chamber cover latch to the closed position (q) and fold it down as shown (w).

    • Be sure the cover is securely latched to prevent the battery from becoming dislodged during operation.

Removing the Battery

Before removing the battery, turn the camera off, lift the battery chamber cover latch, and turn it to the open (A) position.

Removing the Battery Chamber Cover

To unlatch the battery chamber cover so that it can be removed from the battery, slide the battery release in the direction indicated by the arrow (H) until it stops.

The Battery Chamber Cover

  • Use BL-7 battery chamber covers only; other battery chamber covers cannot be used with this camera.
  • You can leave the cover attached when charging batteries in a charger.
  • To prevent dust accumulating inside the battery chamber, replace the battery chamber cover on the camera when the battery is not inserted.

Battery Level

  • The battery level is shown in the shooting display and control panel while the camera is on.

    Monitor

    Viewfinder

    Control panel

  • The battery level display changes as the battery level diminishes, from L through K, J, I, and H. When the battery level falls to H, suspend shooting and charge the battery or ready a spare battery.
  • If the message [Shutter release disabled. Recharge battery.] is displayed, charge or exchange the battery.

The Standby Timer

The camera uses a standby timer to help reduce the drain on the battery. If no operations are performed for about 30 seconds, the standby timer will expire and the monitor, viewfinder, and control panel will turn off. A few seconds prior to turning off, the monitor and viewfinder will dim. They can be reactivated by pressing the shutter-release button halfway. The length of time before the standby timer expires automatically can be selected using Custom Setting c3 [Power off delay] > [Standby timer].