Adjust settings for connection to computers using the camera’s built-in Wi‑Fi.

Wi-Fi Connection

Select [Enable] to connect using the settings currently selected for [Network settings].

Network Settings

Select [Create profile] to create a new network profile ( Connecting in Access-Point Mode , Connecting in Infrastructure Mode ).

  • If more than one profile already exists, you can press J to select a profile from a list.

  • To edit an existing profile, highlight it and press 2. The following options will be displayed:




    • [Profile name]: Rename the profile. By default, the profile name is the same as the network SSID.

    • [Password protection]: Select [On] to require that a password be entered before the profile can be changed. To change the password, highlight [On] and press 2.


    Infrastructure connections: Adjust settings to match those used on the network.

    • [SSID]: Enter the network SSID.

    • [Channel]: The channel is selected automatically.

    • [Authentication/encryption]: Choose from [OPEN] and [WPA2-PSK-AES].

    • [Password]: Enter the network password.

    Ad-hoc connections: Choose the settings used for connection to the camera.

    • [SSID]: Enter the camera SSID.

    • [Channel]: Select [Auto] for automatic channel selection or [Manual] to choose the channel manually.

    • [Authentication/encryption]: Choose from [OPEN] and [WPA2-PSK-AES].

    • [Password]: Choose the password used for connection to the camera when [WPA2-PSK-AES] is selected for [Authentication/encryption].


    Enter TCP/IP information for infrastructure connections. An IP address is required.

    • If [Enable] is selected for [Obtain automatically], the IP address and sub-net mask will be acquired via a DHCP server or automatic IP addressing.

    • Select [Disable] manually to enter the IP address ([Address]) and sub-net mask ([Mask]).


Adjust upload settings.

Auto Send

Select [On] to upload new photos as they are taken.

  • Upload begins only after the photo has been recorded to the memory card; be sure a memory card is inserted in the camera.

  • Movies, together with any photos taken during filming, are not uploaded automatically when recording is complete but must instead be uploaded from the playback display (Selecting Pictures for Upload).

Delete After Send

Select [Yes] to delete photographs from the camera memory card automatically once upload is complete.

  • Files marked for transfer before [Yes] is selected are not deleted.

  • Deletion may be suspended during some camera operations.

Send File As

When uploading NEF+JPEG images, choose whether to upload both the NEF (RAW) and JPEG files or only the JPEG copy.

Deselect All?

Select [Yes] to remove transfer marking from all images. Upload of images with a “sending” icon will immediately be terminated.

MAC Address

Display the MAC address.