Choose the length of the burst recorded from the end of the memory buffer when the shutter-release button is pressed all the way down and the maximum length of the burst recorded while the shutter-release button is fully pressed in high-speed frame capture mode.

1

Portion of buffer recorded to memory card at release ([Pre-release burst])

2

Pictures taken after release ([Post-release burst])

3

Complete high-speed burst

Option

Description

[Pre-release burst]

If an option other than [None] is selected, the camera will buffer frames while the shutter-release button is pressed halfway, but only the frames added to the buffer in the final n seconds, where n is the value selected for [Pre-release burst], will be recorded to the memory card when the shutter-release button is pressed all the way down (“Pre-Release Capture”).

  • If the interval between the shutter-release button being pressed halfway and its being pressed all the way down is shorter than the time selected, only the frames saved to the buffer while the button was pressed halfway will be recorded.

[Post-release burst]

Choose the maximum length of time the camera will continue to take pictures after the shutter-release button is pressed all the way down: [1 s], [2 s], [3 s], or [Max.]. Shooting can continue for up to about 4 s when [Max.] is selected.

A Y icon appears in the shooting display when an option other than [None] is selected for [Pre-release burst]. While the shutter-release button is pressed halfway, a green dot (I) will appear in the icon to show that buffering is in progress.

  • If the shutter-release button is pressed halfway for more than about 30 seconds, C will appear in the icon and Pre-Release Capture will be cancelled. Pre-Release Capture can be resumed by lifting your finger from the shutter-release button and then pressing it halfway again.

A Custom Settings: Fine-Tuning Camera Settings

a: Focus

b: Metering/Exposure

c: Timers/AE Lock

d: Shooting/Display

e: Bracketing/Flash

f: Controls

g: Video